§ 152.094. Information to be included on maps.

The following information shall be included on parcel maps and final maps:

(A)

The north point;

(B)

(1)

All lots intended for sale or reserved for private purposes and all parcels offered for dedication for any purpose, with all dimensions, boundaries, and courses clearly shown and defined in every case, and the lot area, gross and net, to the nearest one-thousand an acre. No ditto marks shall be used.

(2)

Parcels offered for dedication but not accepted shall be designated by letter. Private roads not offered for dedication, or offered but not accepted, shall show the words "Not a Public Road."

(3)

Where adjoining blocks appear on separate sheets, the roads adjoining both blocks shall be shown on both sheets complete with center line and property line data;

(C)

The locations of the roads and trails; the names of the roads; the total width of each road and trail; the width on each side of the center line, the width of the portion of the road and trail being dedicated; and the width of the existing dedication, if any, within the land division or subdivision;

(D)

The locations and widths of the rights-of-way within the land division and subdivision, including the name, type, location, and width of all utility rights-of-way;

(E)

(1)

The side lines of all easements, public and private, to which the lots are subject. The easements shall be clearly labeled and identified as to nature and purpose and, if already of record, their recorded reference given. If any easement is not definitely located and of record, a statement of such easement shall appear on the title sheet.

(2)

Easements shall be denoted by fine dotted lines. Distances and bearings on the side lines of lots which are cut by easements shall be shown with the distance from a corner or angle point to the easement and the width of the easement along the lot line. The total length of the lot line and the exact location of the easement shall be clearly indicated.

(3)

The width of the easements and the lengths and bearings of the lines shall be shown;

(F)

Any limitation on right of access or nonaccess strips or reserve strips to and/or from roads and lots and other parcels of land;

(G)

The locations, widths, and names of the roads and the locations and widths of trails and other rights-of-way adjacent to the land division or subdivision;

(H)

All Town boundaries crossing or adjoining the land division or subdivision shall be clearly designated and located;

(I)

The approved location of septic drain fields including areas for future septic drainfield expansion; and

(J)

The location of building sites on lots which are identified as being in proximity to or within an environmentally sensitive area.

(1975 Code, § 9-1.605) (Ord. 1982-305, effective 4-8-82; Am. Ord. 1988-367, effective 6-9-88)